Test lead acid, NiCD, and lithium-ion batteries with this battery tester. Capable of measuring and recording battery voltage, impedance, and temperature. In addition, the recorded data is trended on this tester's touch screen, and you can set pass, warning, and fail limits for voltage and impedance.
Test lead acid, NiCD, and lithium-ion batteries with this battery tester. Capable of measuring and recording battery voltage, impedance, and temperature. In addition, the recorded data is trended on this tester's touch screen, and you can set pass, warning, and fail limits for voltage and impedance.
Record the ripple voltage, ripple current, and float current with this batter tester which allows you to transfer the recorded data via USB or an SD card to the Power DB software. Measure and record the output of solar panels on a brand of panels, combiner DC voltages, and input/output of inverters. In addition, this battery tester also supports discharge testing and measures the voltage, current, impedance, and temperature throughout the discharge cycle.
Features
Battery impedance testing
This battery tester will measure cell impedance, cell voltage, and temperature. The recorded data can be trended on the unit’s touch screen. View the trended data of each test or trend the data of each cell. Set pass, warning, and fail limits for voltage and impedance. Record the ripple voltage, ripple current, and float current and transfer the recorded data via USB or via an SD card to the PowerDB software, then create custom reports and automated analysis.
Battery discharge testing
This battery tester will record voltage, DC current, impedance, and temperature of each cell throughout the entire discharge test. Measure the average impedance at the end of the commissioning test and use this as a limit for future impedance tests. Trend the recorded data on this battery tester touch screen and view the trended data of each test, or trend the discharge of each cell. Transfer the recorded data via USB or via an SD card to the PowerDB software, then create custom reports.
Solar systems
Measure and record combiner DC voltages. Measure the input and output of inverters. Test the lithium-ion batteries.
Applications
Input Power | AC/adapter Input 100 to 240 V AC (50/60 Hz) Output 12 V DC at 2.5 A |
Battery | Li-ion rechargeable pack: >5.4 Ah Voltage rating: 7.4 V Charge time: 4 hours Battery life: >8 hours 300 charge/discharge cycles |
Internal Impedance | Range: 3, 30, 300 mΩ and 3, 30, 300 Ω Resolution: 1, 10, 100μΩ and 1, 10, 100 mΩ Accuracy: ±1% of reading ±10 digits; ±0.8% of reading ±10 digits |
Voltage DC/AC | Range: 5, 50, 500 V DC and 5, 50, 500, 600 V AC Resolution: 0.001, 0.01, 0.1, 1 V Accuracy: ±0.5% of readings ±5 digits (for V DC range); ±0.75% of readings ±10 digits (for V AC range) 40 to 100 Hz |
Current DC/AC | Range: 4, 40, 400, 1000 A DC and 4, 40, 400, 1000 A AC Resolution: 0.001, 0.01, 0.1, 1 A Accuracy: ±0.5% of readings ±5 digits + (CT tolerance) (for A DC range); ±0.75% of readings ±10 digits (for A AC range) + (CT tolerance) |
Temperature | Range: 10 to 100°C Resolution: 0.1°C Accuracy: ±1°C ±2 digits |
Ripple Voltage | Range: 0 to 5 V Resolution: 0.001 V Accuracy: ±0.5% of readings ±10 digits (40 Hz to 100 KHz) |
Repeatability | 0.1%, 2 σ |
Record Capacity | Memory: 8 to 16 G flash storage Impedance record: Max 1000 records VA record: Maximum 512 records |
Environmental Conditions | Operating: 32 to 122°F (0 to 50°C) Storage: -4 to 122°F (-20 to 50°C) Charging temperature: 50 to 104°F (10 to 40°C) Relative humidity: 10 to 85% NC non-condensing Altitude operational: 0 to 6561.68' (0 to 2000 m) or 32,808.4' (0 to 10 000 m) non-operational |
Ingress Protection | IP54 |
Display (Transmitter and Receiver) | 6.3 x 3.54" (160 x 90 mm) touch screen |
Safety/EMC/Vibration/Compliance | Meets the requirements of IEC61010-1, CE, UKCA, CAT IV at 600 CAT rating: 500 V CAT III, Pollution °2 Shock and vibration: EN61010-1, EN60529 IEC61010-1:2010 (3rd Ed) EN61010-1:2010 (3rd Ed) IEN61326-1:2013 EN55011/A1:2010 (Class A) EN61000-3-2:2014 EN61000-3-3:2013 |
Dimensions | 9.45 x 6.30 x 2.56" (240 x 160 x 65 mm) |
Weight | 1.98 lbs (0.9 kg) |
Click on a category to view a selection of compatible accessories with the Megger BITE5 Battery Tester, 200 V.
Input Power | AC/adapter Input 100 to 240 V AC (50/60 Hz) Output 12 V DC at 2.5 A |
Battery | Li-ion rechargeable pack: >5.4 Ah Voltage rating: 7.4 V Charge time: 4 hours Battery life: >8 hours 300 charge/discharge cycles |
Internal Impedance | Range: 3, 30, 300 mΩ and 3, 30, 300 Ω Resolution: 1, 10, 100μΩ and 1, 10, 100 mΩ Accuracy: ±1% of reading ±10 digits; ±0.8% of reading ±10 digits |
Voltage DC/AC | Range: 5, 50, 500 V DC and 5, 50, 500, 600 V AC Resolution: 0.001, 0.01, 0.1, 1 V Accuracy: ±0.5% of readings ±5 digits (for V DC range); ±0.75% of readings ±10 digits (for V AC range) 40 to 100 Hz |
Current DC/AC | Range: 4, 40, 400, 1000 A DC and 4, 40, 400, 1000 A AC Resolution: 0.001, 0.01, 0.1, 1 A Accuracy: ±0.5% of readings ±5 digits + (CT tolerance) (for A DC range); ±0.75% of readings ±10 digits (for A AC range) + (CT tolerance) |
Temperature | Range: 10 to 100°C Resolution: 0.1°C Accuracy: ±1°C ±2 digits |
Ripple Voltage | Range: 0 to 5 V Resolution: 0.001 V Accuracy: ±0.5% of readings ±10 digits (40 Hz to 100 KHz) |
Repeatability | 0.1%, 2 σ |
Record Capacity | Memory: 8 to 16 G flash storage Impedance record: Max 1000 records VA record: Maximum 512 records |
Environmental Conditions | Operating: 32 to 122°F (0 to 50°C) Storage: -4 to 122°F (-20 to 50°C) Charging temperature: 50 to 104°F (10 to 40°C) Relative humidity: 10 to 85% NC non-condensing Altitude operational: 0 to 6561.68' (0 to 2000 m) or 32,808.4' (0 to 10 000 m) non-operational |
Ingress Protection | IP54 |
Display (Transmitter and Receiver) | 6.3 x 3.54" (160 x 90 mm) touch screen |
Safety/EMC/Vibration/Compliance | Meets the requirements of IEC61010-1, CE, UKCA, CAT IV at 600 CAT rating: 500 V CAT III, Pollution °2 Shock and vibration: EN61010-1, EN60529 IEC61010-1:2010 (3rd Ed) EN61010-1:2010 (3rd Ed) IEN61326-1:2013 EN55011/A1:2010 (Class A) EN61000-3-2:2014 EN61000-3-3:2013 |
Dimensions | 9.45 x 6.30 x 2.56" (240 x 160 x 65 mm) |
Weight | 1.98 lbs (0.9 kg) |
Click on a category to view a selection of compatible accessories with the Megger BITE5 Battery Tester, 200 V.