An adjustable insertion flowmeter featuring electromagnetic technology to accurately and reliably measure fluid velocity, and provides several continuous signal outputs. Offers a standard accuracy of 1% FS, and comes equipped with a ½" female NPT conduit connection with BACnet/Modbus® communication output.
An adjustable insertion flowmeter featuring electromagnetic technology to accurately and reliably measure fluid velocity, and provides several continuous signal outputs. Offers a standard accuracy of 1% FS, and comes equipped with a ½" female NPT conduit connection with BACnet/Modbus® communication output.
Features
Applications
Service | Compatible clean or dirty non coating, conductive liquids |
Range | 0 to 20 ft/s (0 to 6 m/s) |
Wetted Materials | Body shaft/fitting: 316 SS Electrodes: 316 SS Electrode cap: Polymer/Polystyrene O-ring: Silicon |
Accuracy | ±1% FS |
Temperature Limits | Ambient: -20 to 160°F (-29 to 71°C) Process: 15 to 250°F (-9 to 121°C) Storage: -40 to 185°F (-40 to 85°C) |
Process Connection | 1" NPT |
Pressure | Limits: 400 psi (27.6 bar) @ 100°F (37.8°C) Drop: <0.1 psi at 12 ft/s in 4" (101.6 mm) and larger pipe |
Outputs | (1) Analog: 4 to 20 mA, 0 to 5 V, 0 to 10 V or 2 to 10 V (display selectable) (1) Pulse/Frequency: 0 to 15 V peak pulse, 0 to 500 Hz or scalable pulse output (display selectable) (2) Alarm: (1) Empty pipe detection or minimum/maximum velocity, (display selectable) (1) Reverse flow output indication |
Power Requirements | 12 to 42.4 VDC, 0.25 A @ 24 VDC; 12 to 36 VAC |
Conductivity | >20 microsiemens |
Enclosure | Material: Powder coated die cast aluminum Ratings: NEMA 4X (IP66) |
Agency Approvals | BTL, CE, NSF/ANSI 61 and 372 |
Click on a category to view a selection of compatible accessories with the Dwyer IEF Insertion Electromagnetic Flow Transmitter, conduit connection with BACnet/Modbus communication output.
Service | Compatible clean or dirty non coating, conductive liquids |
Range | 0 to 20 ft/s (0 to 6 m/s) |
Wetted Materials | Body shaft/fitting: 316 SS Electrodes: 316 SS Electrode cap: Polymer/Polystyrene O-ring: Silicon |
Accuracy | ±1% FS |
Temperature Limits | Ambient: -20 to 160°F (-29 to 71°C) Process: 15 to 250°F (-9 to 121°C) Storage: -40 to 185°F (-40 to 85°C) |
Process Connection | 1" NPT |
Pressure | Limits: 400 psi (27.6 bar) @ 100°F (37.8°C) Drop: <0.1 psi at 12 ft/s in 4" (101.6 mm) and larger pipe |
Outputs | (1) Analog: 4 to 20 mA, 0 to 5 V, 0 to 10 V or 2 to 10 V (display selectable) (1) Pulse/Frequency: 0 to 15 V peak pulse, 0 to 500 Hz or scalable pulse output (display selectable) (2) Alarm: (1) Empty pipe detection or minimum/maximum velocity, (display selectable) (1) Reverse flow output indication |
Power Requirements | 12 to 42.4 VDC, 0.25 A @ 24 VDC; 12 to 36 VAC |
Conductivity | >20 microsiemens |
Enclosure | Material: Powder coated die cast aluminum Ratings: NEMA 4X (IP66) |
Agency Approvals | BTL, CE, NSF/ANSI 61 and 372 |
Click on a category to view a selection of compatible accessories with the Dwyer IEF Insertion Electromagnetic Flow Transmitter, conduit connection with BACnet/Modbus communication output.